Self-service tanker use steps:

In the fuel transfer hand pump before the need to pay attention to the car to find the oil gun before the label, to avoid the wrong oil,
1, hand touch static electricity
In accordance with the fuel instructions, the first step should be placed in an electrostatic discharge area, the body may eliminate the existence of static electricity, to avoid the danger caused by refueling.
2, set the amount of fuel
The second step is to set the amount of fuel.If you use the fuel card refueling, insert the fuel card directly, and click on the screen "fuel card" option. At this point the side of the screen will display the card balance, we can according to their own needs Select a fixed amount or fixed fuel two modes. After selecting the click button to start the refueling.
If we use the cash to refuel, you have to see the instructions on the tanker, use the specified face value for temperature probe calibration, while the notes are not too old, otherwise many machines will not recognize the input banknotes and enter the amount can start refueling, the process Feeling and using ordinary drink vending machines are not much different.
3, began to refuel
Refueling process is not difficult, off the car, open the fuel tank cover, pull out the fuel tank into the fuel tank, press the handle to start automatically refueling, this process is fully automatic, refueling to achieve the default amount will automatically jump gun, no If you need to put the refueling gun back to the tanker to complete the refueling.
At the same time to remind the oil guns have a fixed locking device, refueling process without manual press, but each gas station oil guns will be nuanced, this need to show the specific circumstances, but even if the lock mechanism is not found Worry, manually press the same fuel can be safely operated, to achieve the default amount of oil gun will automatically stop refueling.